DP 6.20 & RedHat 6 Installation Issue (1743 Views)
Reply
Occasional Visitor
Vlke
Posts: 3
Registered: ‎01-31-2012
Message 1 of 8 (1,743 Views)

DP 6.20 & RedHat 6 Installation Issue

I'm trying to install data protector 6.20 on RHEL6 server as a CM and IS.

After start ./omnisetup.sh -CM -IS

 

  The omnisetup.sh script didn't finish last time
  Cell Manager still has to be installed
  Installation Server still has to be installed

  The omnisetup.sh script can now continue the unfinished installation
  or it can ignore the saved state and start a new one.
  If you choose to ignore, the script will erase the saved state
  and will process only the command line options
  Do you want to continue the unfinished installation? (Y/n)
n
  Ignoring saved state...

  No Data Protector software detected on the target system.


Installing Data Protector A.06.20 Cell Manager and Installation Server...

Installing OB2-CORE packet
Preparing...                ########################################### [100%]
   1:OB2-CORE               ########################################### [100%]

 

This row is the last what I see for X minutes ... it seems like installation hangs, in ps -ef I see this:

 

# ps -ef | grep omni
root      8113  8112 99 10:31 pts/0    00:10:51 /opt/omni//bin/omnicc -put_component_str core client/omni_format client/omni_info A.06.20

 

any advice ???

Thx

Please use plain text.
Honored Contributor
Sebastian.Koehler
Posts: 1,155
Registered: ‎02-27-2007
Message 2 of 8 (1,736 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

Have you checked the prerequisites in the installation manual? Those issues are most likely related to /etc/services (remove all entries for 5555/TCP) and/or missing/wrong name resolution. Once checked, rm -rf /etc/opt/omni /opt/omni /var/opt/omni /tmp/* and start over.

Regards,
Sebastian
---
Assign a kudo to this post, if you find it useful.
Please use plain text.
Occasional Visitor
Vlke
Posts: 3
Registered: ‎01-31-2012
Message 3 of 8 (1,705 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

Thank you very much Sebastian, name resolution was that issue.
However, after correction and new installation - it finished by the error:
Cannot start "uiproxy" service, system error:
[1053] Unknown error 1053

If I try to run omnisv -status:

./omnisv -status
ProcName Status [PID]
===============================
rds : Active [26461]
crs : Active [26480]
mmd : Active [26474]
kms : Active [26477]
omnitrig: Active
uiproxy : Down
Sending of traps disabled.
===============================
Status: At least one of Data Protector relevant processes/services is not running.

can you give me any idea to this? thank you
Vlke

Please use plain text.
Honored Contributor
Sebastian.Koehler
Posts: 1,155
Registered: ‎02-27-2007
Message 4 of 8 (1,699 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

Check if the compat-libstdc++-33 package is installed.

 

Regards,

Sebastian

---
Assign a kudo to this post, if you find it useful.
Please use plain text.
Occasional Visitor
Vlke
Posts: 3
Registered: ‎01-31-2012
Message 5 of 8 (1,697 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

yes, it is

Package compat-libstdc++-33-3.2.3-61.x86_64 already installed and latest version

Vlke
Please use plain text.
Honored Contributor
Sebastian.Koehler
Posts: 1,155
Registered: ‎02-27-2007
Message 6 of 8 (1,690 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

Try ldd /opt/omni/java/server/bin/uiproxyd or /opt/omni/java/server/bin/uiproxyd to see what library is missing. I usually add some of the library paths to /etc/ld.so.conf.d/omni of the system and run ldconfig afterwards.

 

Regards,

Sebastian

---
Assign a kudo to this post, if you find it useful.
Please use plain text.
Occasional Advisor
Matthias Schündehütte
Posts: 13
Registered: ‎03-01-2011
Message 7 of 8 (1,682 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

[ Edited ]

Hi,

 

did you install "xinetd" on your RHEL-Box?

 

I have two RHEL 6.2-Workstation boxes and I had to add the 'xinetd'-package manually. The DP communication daemon will be started by 'xinetd', so without this daemon there's no network communication possible.

 

Hope this helps...

 

 

Matthias

Please use plain text.
Honored Contributor
Sebastian.Koehler
Posts: 1,155
Registered: ‎02-27-2007
Message 8 of 8 (1,677 Views)

Re: DP 6.20 & RedHat 6 Installation Issue

xinetd should be installed, since only uiproxy fails to start. The library path should fix the issue.

Regards,
Sebastian
---
Assign a kudo to this post, if you find it useful.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation