Rename Networking legacy ITRC forum? (169 Views)
Reply
Esteemed Contributor
paulgear
Posts: 655
Registered: ‎04-03-2011
Message 1 of 3 (169 Views)

Rename Networking legacy ITRC forum?

Hi moderators,

 

The networking legacy ITRC forum remains a high-volume forum, years after creation of the new ones.  It would be great if we could encourage people using that forum to move their questions to the new forums.  One suggestion is to remove the word "switches" from the title, so that they go to the ProCurve/ProVision or Comware forums for switches.  But that's probably not enough - interested to hear any other way we can get those posts classified better.

Regards,
Paul
Please use plain text.
Esteemed Contributor
paulgear
Posts: 655
Registered: ‎04-03-2011
Message 2 of 3 (168 Views)

Re: Rename Networking legacy ITRC forum?

I forgot to add that it would be good if we could put a note at the top of http://h30499.www3.hp.com/t5/ProCurve-ProVision-Based/bd-p/switching-e-series-forum that it doesn't include 1400/1800/1900 series. We're still getting a lot of posts for them there.
Regards,
Paul
Please use plain text.
Acclaimed Contributor
Dennis Handly
Posts: 24,759
Registered: ‎03-06-2006
Message 3 of 3 (157 Views)

Re: Rename Networking legacy ITRC forum?

>is to remove the word "switches" from the title

 

Yes, that's a simple suggestion.  But if doing searches, they may find it due to the shear numbers.

 

>that it doesn't include 1400/1800/1900 series.

 

Yes, suggestions on what doesn't go there, with pointers to the other boards.

It would be a good idea to list as many product numbers as possible to indicate the correct boards.

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation