11-06-2006 06:00 AM
Solved! Go to Solution.
11-08-2006 12:38 AM
Are you trying to acheive the allocation of REAL IP addresses rather than using the internal NAT (220.127.116.11 allocation) to wireless clients ?
If so this can be done with a little bit of configuration which 700wl's are you using ?
are you using 720wl AC and 740wl ACS (745wl new ACS) or are you using a 760wl IAM ??
If you can let me know which you are using I will let you know how to configure REAL IP allocation.
11-08-2006 03:27 AM
you won't be able to control the IP addresses allocated to the wireless clients as these are allocated by the ACâ s(720wl) and NAT overload takes place, so that these machines can communicate on the domain.
If you wish to communicate between clients for IP based applications or require remote desktop support, you will have to use the REAL IP allocation.
This will also give you the ability to use an IP Address range/subnet for your private network and another IP Address range/subnet for your wireless network. then interoperability between both can be controlled or they can be left separate.
Which private IP addressing scheme do you have configured ?
Are you using VLANS ?
Are you using Wired and Wireless access through out the whole network ? Who uses what ?
Are the ACSâ s and ACâ s on the same site or do you have a distributed WAN solution ?(ACSâ s on one site and ACâ s distributed to remote sites)
11-09-2006 12:11 AM