Re: HPCA Agent Version Upgradation (380 Views)
Reply
Occasional Visitor
arul461
Posts: 1
Registered: ‎01-07-2013
Message 1 of 5 (389 Views)

HPCA Agent Version Upgradation

Hi,

 

In our environment we are using the HPCA client version 7.80 currently and going to upgrade to 7.81

 

Please share if you have any document regarding the steps to upgrade the HPCA client version.

 

Appreciate your help!

 

Please use plain text.
Trusted Contributor
Pravs
Posts: 127
Registered: ‎03-04-2010
Message 2 of 5 (382 Views)

Re: HPCA Agent Version Upgradation

Hi,

Are ypu talking about "applying" 7.80.1 patch ? If yes then please contact HPCa support to get the latest CP. 7.80.1 is extremely old and you may miss quite a few of the fixes done on 7.80 .

 

-PRaveen

Please use plain text.
Esteemed Contributor
Gowhar Jan
Posts: 212
Registered: ‎01-08-2009
Message 3 of 5 (380 Views)

Re: HPCA Agent Version Upgradation

Each patch comes with a Release notes document. You may find all the information you need to install the patch there.

Please use plain text.
Advisor
afs
Posts: 14
Registered: ‎07-05-2011
Message 4 of 5 (363 Views)

Re: HPCA Agent Version Upgradation

One example of installation of an Agent patch could be...

 

Installing the version 7.80.2 patch
1 Back up your system.
2 Download the patch file.

3 Extract the import.txt, ClearZSTOP.tcl, .xpi and .xpr contents of the .zip file into the HP Configuration Management Configuration Server (CM Configuration Server) \bin directory. The default location is:
– C:\Program Files\Hewlett-Packard\CM\ConfigurationServer\bin
The patch zip also contains modules.zip, the binaries included in modules.zip is for convenience only. Hewlett-Packard recommends that you use self-maintenance to deploy the entire patch.
4 Stop the HPCA Configuration Server service (ZTOPTASK).
5 Take a backup of the entire HPCA Configuration Server Database (HPCA CSDB).
6 For Client Automation Standard/Starter see the instructions for removing ZSTOP expressions.
7 Open a command prompt, change directories to \bin, and run the command:
ZEDMAMS ZFILE IMPORT.TXT.
8 Check the zedmams.log file to verify that each of the packages returns with either rc=4 or rc=0.
9 Restart the HPCA Configuration Server service (ZTOPTASK).
Removing ZSTOP expression for deployment on CAE environment
1 Open the HPCA Admin CSDB editor
2 Navigate to the PRIMARY.PRDMAINT.PACKAGE Class and open the package that needs to be installed. For example, RAM_WIN32_ALL_<CurrentVersion>
3 Clear the ZSTOP000 value or set the value to 0.

HP Software
If you find that this or any post resolves your issue please be sure to mark it as an accepted solution.
Please use plain text.
Valued Contributor
MariaC.
Posts: 56
Registered: ‎04-13-2010
Message 5 of 5 (346 Views)

Re: HPCA Agent Version Upgradation

Hi arul461,

 

I would recommend you to apply the latest 7.80 patches both for the Agent and the CORE server. You can apply the latest patch without installing previous ones first.

 

Assuming you are running a Core and Satellite environment, please find the latest patches below:

 

Windows Agent Patch 7.80.10: http://support.openview.hp.com/selfsolve/document/FID/DOCUMENTUM_RADAPPSWIN32_00072

 

Linux Agent Patch 7.80.10: http://support.openview.hp.com/selfsolve/document/LID/RADAPPSLNX_00028

 

Core&Satellite Patch 7.80.12: http://support.openview.hp.com/selfsolve/document/LID/RADINFRAWIN32_00121

 

Instructions are included in the release notes for each patch.

 

Please contact HP Support if you have any issues or need further information.

 

Thank you!

Maria

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation