HP Prime - RPN Mode - Entering Algebraic Expression (5656 Views)
Reply
Occasional Contributor
vniezrecki
Posts: 4
Registered: ‎11-02-2013
Message 1 of 3 (5,656 Views)
Accepted Solution

HP Prime - RPN Mode - Entering Algebraic Expression

For HP Prime calculator in RPN mode, is there a way to enter an algebraic expression?  For example, on HP 50G you use the Tick button, "'" to start the expression and then continue as algebraic.  Should I just switch to CAS to do that?

Please use plain text.
Trusted Contributor
Joseph Horn
Posts: 92
Registered: ‎09-25-2006
Message 2 of 3 (5,631 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Entering algebraic expressions on the HP Prime is done the same way as on the HP 50g: just put tick marks around the expression.  On the HP Prime, the tick mark is a shifted key: [Shift] [ ( ) ].

 

Hope that helps!

-Joe-
Please use plain text.
Occasional Contributor
vniezrecki
Posts: 4
Registered: ‎11-02-2013
Message 3 of 3 (5,580 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Yes, thank you.  It does work!  It is confusing because the user manual does not seem to explain RPN mode much.  But I see it works.   

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation