Re: uCMDB 9.05 to AM 9.30 (332 Views)
Reply
Occasional Collector
BulgarianPartne
Posts: 2
Registered: ‎12-22-2011
Message 1 of 3 (353 Views)

uCMDB 9.05 to AM 9.30

Hi,

 

Can I use uCMDB 10.0's  AM push adapter in uCMDB 9.05, like in uCMDB 10 ?

To export adapter from 10 and then to import in 9.05 ?

 

thanks,

Pedja

HP Expert
Dima Gomel
Posts: 923
Registered: ‎03-09-2010
Message 2 of 3 (345 Views)

Re: uCMDB 9.05 to AM 9.30

Hi,

Both 9.05 and 10.0 using same code for a push adapter, but general product codebases are different.

You could expect that your mapping files ported manually will work in 9.05 same way, but direct deployment doesn't supported.

Please be sure you're using latest CUP on top of 9.05.

For your convinience CUP8 for UCMDB 9.05 could be found at http://support.openview.hp.com/selfsolve/document/FID/DOCUMENTUM_UCMDB_00100.

Regards
-Dima, HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at bottom to say 'Thanks'
I'll be happy to be in touch at LinkedIn .
HP Expert
Dima Gomel
Posts: 923
Registered: ‎03-09-2010
Message 3 of 3 (332 Views)

Re: uCMDB 9.05 to AM 9.30

I checked this with R&D and the answer is NO. You can't do this.

There is a very good reason why CP11 for version 9 doesn't contain many resources that are part of CP11 for version 10 do. The push to AM is one of them… there are many changes in the engine that made the push to AM possible and are not part of the 9 version.

Regards
-Dima, HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at bottom to say 'Thanks'
I'll be happy to be in touch at LinkedIn .
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.