Unable to remove numlock (54 Views)
Reply
Occasional Visitor
LEVRARD, Louise
Posts: 1
Registered: ‎10-18-2000
Message 1 of 4 (54 Views)

Unable to remove numlock

[ Edited ]

I'm running NT 4.0 on a VEi8 and even though in setup (F2) the numlock is on "on", it doesn't actually turn on when I get to Winnt! Any ideas?

 

 

 

 

 

P.S. This thread has been moved from Archived Desktops and Workstations Boards >Windows based >to Business PCs - Evo, Deskpro, Vectra, Kayak, Brio, e-PC. -HP Forum Moderator

Please use plain text.
Occasional Advisor
Vicentiu Daniel Maxim
Posts: 9
Registered: ‎11-08-2000
Message 2 of 4 (54 Views)

Re: Unable to remove numlock

Hello Louise,
Can you give me some additional infos about your PC, like BIOS for example?
Anyway, you have to check your BIOS settings first...
Think straight and right to the point
Please use plain text.
Respected Contributor
Dries Bertier
Posts: 443
Registered: ‎08-06-2001
Message 3 of 4 (54 Views)

Re: Unable to remove numlock

To enable NUM LOCK before a user logs on, use the steps below:
Run Registry Editor (Regedt32.exe).
Navigate to HKEY_USERS\.Default\Control Panel\Keyboard.
Change the value for InitialKeyboardIndicators from 0 to 2.
<< please try >>
Please use plain text.
Occasional Advisor
Howard Nauss
Posts: 8
Registered: ‎08-14-2001
Message 4 of 4 (54 Views)

Re: Unable to remove numlock

Hi! Howard here, If you've upgrade your operating system(s) 1x or 2x from say Win95,
you may have; a file called "config.sys" in
your windows folder. If you open/edit this file
you may find 1 line thats says; "numlock on".
You can enable/disable it by typing ; in the 1st column immediately before that line. Save
your file as config.sys (overwrite = yes).Then
reboot! See if this helps you!
There's always a Better Way!
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation