Re: Boot from PCI Device (249 Views)
Occasional Contributor
Posts: 4
Registered: ‎12-05-2006
Message 1 of 2 (249 Views)

Boot from PCI Device

[ Edited ]

I have a Compaq Deskpro EP/SB with a Compaq 041Ch motherboard.

I've recently added a Promise Ultra100 ATA Controller with a 80GB drive.

Is there a way to boot from the 80GB drive plugged to the Promise card?



P.S. This thread has been moved from Archived Desktops and Workstations Boards > general to Business PCs - Evo, Deskpro, Vectra, Kayak, Brio, e-PC - Hp Forum Moderator

Frequent Advisor
Posts: 45
Registered: ‎12-01-2010
Message 2 of 2 (249 Views)

Re: Boot from PCI Device

In the System BIOS (settings)/Boot Menu, you should see option to select Primary boot controller.
If Promise Ultra100 ATA Controller is listed, you can set that as Primary, and it should be able to boot from drive you would attch to this controller.

Please assign points if you think information provided was useful!

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.