04-14-2013 10:46 PM - last edited on 04-15-2013 07:00 PM by maikoro
I have a compaq Deskpro 486s /25m its a dx2 66
My problem with it is that it doesn't have normal ide slots on the motherboard for the hd, floppy and cd cdrives. Rather slots that look like those old expansion card slots on commodore 64s etc. They appear from underneath the power box. ive got the correct cable for the hard disk one and it works. the cable has one end that is your usual 39 pin ide female that fits to the hard disk and the other end is this 38 pin strange narrow hole connector that fits onto the card slot of the computerl. I want another one like this for the cd drive. Ive searched everywhere and found nothing about these connectors and cables. If someone could tell me what they are called, or where i can get one, it would be greatly appreciated.
P.S. This thread has been moved from Remote PC Solutions to Business PCs - Evo, Deskpro, Vectra, Kayak, Brio, e-PC - HP Forums Moderator
05-14-2013 02:34 PM
I had one of these a few years back.. If I remember correctly you have to put a cab;e with a doule connector on it So that the CDROM and hard drive on on the same controller. Most older CDroms included such a cable. I hope tis helps.
12-31-2013 05:03 PM
That is a PATA standard interface cable supporting the cable select method.
There are different versions out there.
As far as I know U-PATA A_PATA and a very rare version of 386 PCATA.
YOu may ask Wikipedia for advice!