power draw from PCs (amps?) (299 Views)
Reply
Occasional Visitor
Roman Revell
Posts: 2
Registered: ‎03-25-2011
Message 1 of 4 (299 Views)

power draw from PCs (amps?)

[ Edited ]

I have a bunch of Compaq 6005 Pro small form factor PCs that I want to plug in somewhere, but I don't know what the power requirements will be. I guess I need to know the maximum amperage of each PC.
Can anyone help me figure this out so that I don't blow a fuse plugging too much into one power strip?

 

 

P.S. This thread has been moved from Archived Desktops and Workstations Boards > general to Business PCs - Compaq, Elite, Pro - Hp Forum Moderator

Occasional Visitor
Garth Hoyman
Posts: 3
Registered: ‎12-22-2010
Message 2 of 4 (299 Views)

Re: power draw from PCs (amps?)

under 1 amp
http://michaelbluejay.com/electricity/computers.html
monitors draw more than the pc's
Honored Contributor
Pieter 't Hart
Posts: 1,984
Registered: ‎09-04-2002
Message 3 of 4 (299 Views)

Re: power draw from PCs (amps?)

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01865083〈=en&cc=us&taskId=101&prodSeriesId=4024556&prodTypeId=12454

the PSU is specified as 240W
at 220V that's a little above 1A
at 110V about 2A.

But then again this is the maximum, the system will ever use.
If not fully populated power consumption will be much less.
Only when all the systems are connected to a common fuse and all powered up at the same time, you need to worry about this maximum.
Occasional Visitor
Roman Revell
Posts: 2
Registered: ‎03-25-2011
Message 4 of 4 (299 Views)

Re: power draw from PCs (amps?)

Thanks. I think that helps.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.