dc7900 ME error (676 Views)
Reply
Occasional Visitor
sudeep_5
Posts: 2
Registered: ‎09-29-2009
Message 1 of 4 (676 Views)

dc7900 ME error

When ever i start the system, after giving the ME Version number it gives the following error and halts

2231-ME error during MEBX execution
MEBX satatus = 0103
ME BIOS extesion module halted
Update BIOS or ME firmware if problem persists

2206- End of POST HECI failure
System Halted. Power cycle the system to reboot.

Its HP compaq dc7900 CMT base unit PC
I am using Fedora 11 o.s

Any help would be appreciated.
Please use plain text.
Occasional Visitor
Alibali
Posts: 1
Registered: ‎11-12-2009
Message 2 of 4 (676 Views)

Re: dc7900 ME error

Hi Sudeep
I have also experienced this same error,looking at latest forums you are advised to check the bios rev level.However on my case I couldn't get any video output either therefor I couldn't do this.They also suggest clearing the cmos which I did but made no diffence. I believe the fix for this is to replace the system board but I will let you know as I have raised a warranty call through HP.
Please use plain text.
Occasional Visitor
W Jerrell
Posts: 1
Registered: ‎12-07-2009
Message 3 of 4 (676 Views)

Re: dc7900 ME error

Did you ever get this issue resolved? If so, what was the result?

I'm having the same issue with a workstation as well.

Thanks.
Please use plain text.
Occasional Visitor
sudeep_5
Posts: 2
Registered: ‎09-29-2009
Message 4 of 4 (676 Views)

Re: dc7900 ME error

The problem was with mother board I got it replaced from the company. Now its working fine. It also looks like this pc is not compatible to Linux.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation