Windows xp ethernet driver for HP 6000 Pro microtower (774 Views)
Reply
Occasional Visitor
Jeffdeit
Posts: 1
Registered: ‎05-07-2013
Message 1 of 4 (774 Views)

Windows xp ethernet driver for HP 6000 Pro microtower

Tried every driver from HP's website and none work. 

 

Hardware ID is:

PCI\VEN_8086&DEV_10DE&SUBSYS_3048103C&REV_02

PCI\VEN_8086&DEV_10DE&SUBSYS_3048103C

PCI\VEN_8086&DEV_10DE&CC_020000

PCI\VEN_8086&DEV_10DE&CC_0200

 

Trying to load windows xp pro on this computer and I'm stuck on the ethernet driver.  Any help is greatly appreciated.

 

Thanks,

Jeff

Honored Contributor
Paul Tikkanen
Posts: 3,350
Registered: ‎04-11-2007
Message 2 of 4 (770 Views)

Re: Windows xp ethernet driver for HP 6000 Pro microtower

Hi, Jeff:

 

I don't know why several of the Intel NIC drivers don't work on the HP support sites but that problem does not just lie with the 6000 Pro's.

 

Download and install the XP driver directly from Intel, and you should be fine.  First file listed is for XP 32 bit.

 

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22711&lang=eng&OSVersion=Windows%20X...

HP Pro
soccer_dan
Posts: 295
Registered: ‎04-01-2011
Message 3 of 4 (755 Views)

Re: Windows xp ethernet driver for HP 6000 Pro microtower

The HP Compaq 6000 Pro uses an Intel nic and drivers should work. In some cases the softpaq may not actually install (happens rarely but it does happen :-( ). I would recommend you download and run the latest drvier available for the desktop, sp58035.exe. Then, in Windows Device Manager, point to the C:\SWSETUP\SP56035\... location to update the driver directly from there. Right click on the Intel network in Device Manager and select Update Driver.

 

Best, however, is to use the Softpaq Download Manager (www.hp.com/go/sdm) to install all available and needed updates for your systems. Just a note of caution to only select and update h/w driver and BIOS (needs to be done independent of any other updates) with SDM

 

Hope this helps

I work for HP
Occasional Collector
UberNibbler
Posts: 1
Registered: ‎01-29-2014
Message 4 of 4 (562 Views)

Re: Windows xp ethernet driver for HP 6000 Pro microtower

Had the same issue.  Used Network Adapter Drivers for Windows XP*, Final Release from Intel and it worked just fine.

The driver name is PRO2K3XP_32.exe or PRO2K3XP_x64.exe version 18.3 and it's for  82567LM NIC.  

 

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18717&keyword=+82567LM&lang=eng

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.