08-20-2008 03:01 AM
09-02-2008 10:10 AM
09-10-2008 07:08 AM
Thanks alot for the suggested info, but result just same as what J Leeham responded.
The device did show up in the Device Manager with a "Yellow Exclamation Mark" What does it mean? I'm not very good with computer, how am i suppose to know doesnt it show in BIOS?
09-10-2008 07:19 AM
If you right mouse click the Yellow mark and select update...
It should look for the driver on your PC.
If found, it will update...
It should also look on the internet too.
80% that it will find it though...
let us know how it goes up to that point...
say thanks with HP POINTS
03-04-2009 02:33 AM
Does anyone know how I can fix this?
09-06-2009 11:04 PM
10-14-2010 08:39 PM
Here is a problem with Windows Vista and 7 If your original driver is corrupted and you unistall the device it will be corrupted when you reboot. What you have to do when you uninstall a device on the page to unistall the device at the bottom left the is a button to check that deletes the driver you need to check that button and let windows delete the driver. You may have to reinstall the driver but if the hardware is OK it should then work.
11-13-2011 09:38 PM
click the above link
download and run the microsoft FixIt program for cd and dvd
it solves the problem and reapirs the driver in about a minute
for further questions contact me : email@example.com
03-25-2012 03:57 AM
I cannot use my CD/DVD device in my computer. When I checked at the device manager, the following information was stated:
Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39).
Which driver is the best for update and do I have to buy it? I thought the update should be free?
02-17-2013 09:28 AM
I was also facing the same problem .....
My cd/dvdr device was not showing up in My computer....
I checked for it in my device manager...... there i saw the device(TSSTcorp CD/DVDW TS-H653N ATA Device)
did show up in the Device Manager with a "Yellow Exclamation Mark.....
when I tried to use the device it say the driver is corrupt or it is missing......
Then I looked for many solution on internet....and finally found one.....
Just download the software(link proved below) and run it.....it doesn't need any insatllation.....Once you do .... you can see device manager opens up automatically..... just close it ....and restart you computer.....
when computer restarts it will automatically install the device driver and after that , the problem will be fixed....
Download Link: http://drivers.pcpitstop.com/Display/2006/06/Displ
i have also attached the software.....