Re: Power requirement for dc7100 dc7600 and dc7800 -900 (1970 Views)
Reply
Occasional Visitor
cwstad
Posts: 3
Registered: ‎05-12-2010
Message 1 of 6 (1,970 Views)

Power requirement for dc7100 dc7600 and dc7800 -900

Hi all, im looking to get some details regarding the power requirment for the above models. Im just looking for some average usage in watts and also how much the units consume in standby. thanks for your help
Honored Contributor
V. Nyga
Posts: 4,874
Registered: ‎09-20-2002
Message 2 of 6 (1,970 Views)

Re: Power requirement for dc7100 dc7600 and dc7800 -900

Hi,

about this you'll find plenty in the net:
http://extreme.outervision.com/psucalculatorlite.jsp

http://www.cdrinfo.com/sections/news/Details.aspx?NewsId=22582

or just google

HTH
V.
*** Say 'Thanks' with Kudos ***
Occasional Visitor
cwstad
Posts: 3
Registered: ‎05-12-2010
Message 3 of 6 (1,970 Views)

Re: Power requirement for dc7100 dc7600 and dc7800 -900

Hi V thanks for your reply. id found something similar myslef but i was cusrious at to what HP specifies in terms of power consumption. id had a look at some specs but couldnt find anything concrete.
Honored Contributor
V. Nyga
Posts: 4,874
Registered: ‎09-20-2002
Message 4 of 6 (1,970 Views)

Re: Power requirement for dc7100 dc7600 and dc7800 -900

Hi again,

well, I think you won't get anything more concrete than in this spec:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162202/c01162202.pdf

under specifications -> 90 - 264 VAC

V.
*** Say 'Thanks' with Kudos ***
Honored Contributor
John Kirk
Posts: 4,061
Registered: ‎01-20-2003
Message 5 of 6 (1,970 Views)

Re: Power requirement for dc7100 dc7600 and dc7800 -900

cwstad

This is dependent on which model and what addin components you have added. The numbers that HP provides are a conservative maximum. In other words if you measured the power actually being consumed by your computer it would likely be considerably less than what is in the manual.

However the numbers listed are:

dc7100 - 4 amps to 8 amps depending on model
dc7600 - 4 amps to 6 amps depending on model
dc7800 - 2.2 amps to 6 amps depending on model
dc7900 - 2.4 amps to 6 amps depending on model

Hope this helps.

John K.
Occasional Visitor
cwstad
Posts: 3
Registered: ‎05-12-2010
Message 6 of 6 (1,970 Views)

Re: Power requirement for dc7100 dc7600 and dc7800 -900

Hi John thats great i have a power meter but was unable to get my hands on some of the older PC's at my office so thanks for that
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.