Missing Driver DX7300 PCI Simple Communications Controller (2747 Views)
Reply
Occasional Visitor
Brad Polkinghorne
Posts: 1
Registered: ‎05-13-2007
Message 1 of 4 (2,747 Views)

Missing Driver DX7300 PCI Simple Communications Controller

G'day Guys,

Just reinstalled my new DX7300 with Vista Enterprise and it's missing one driver on install. Can't seem to find anything in the drivers section which clears it but doesn't seem to restrict any of the main hardware either.

Location information:
PCI bus 0, device 3, function 0

Hope someone can help.

Thanks in advance.

b j p
Honored Contributor
Rich S
Posts: 11,869
Registered: ‎07-03-2005
Message 2 of 4 (2,747 Views)

Re: Missing Driver DX7300 PCI Simple Communications Controller

Here are the drivers for your PC and OS:

http://tinyurl.com/2sf7eq


Its hard to find the one missing without doing research on the issue.


More than likely its the USB...

Just load the Intel driver form the above link under the heading of Driver-Chipset.


Rich


say thanks with HP POINTS
Honored Contributor
Rich S
Posts: 11,869
Registered: ‎07-03-2005
Message 3 of 4 (2,747 Views)

Re: Missing Driver DX7300 PCI Simple Communications Controller

Here are the drivers for your PC and OS:

http://tinyurl.com/2sf7eq


Its hard to find the one missing without doing research on the issue.


More than likely its the USB...

Just load the Intel driver from the above link under the heading of Driver-Chipset.


Rich


say thanks with HP POINTS
Honored Contributor
John Kirk
Posts: 4,061
Registered: ‎01-20-2003
Message 4 of 4 (2,747 Views)

Re: Missing Driver DX7300 PCI Simple Communications Controller

Brad

The Simple Communication Controller is a soft modem. I believe that installing the chipset driver may solve the problem.

Hope this helps.

John K.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.