Maximum Ram for HP d220 MT (8031 Views)
Reply
Occasional Visitor
Allen Rose
Posts: 1
Registered: ‎04-09-2008
Message 1 of 3 (8,031 Views)

Maximum Ram for HP d220 MT

Need to know what is the maximum amount of Ram that can be installed in one of these machines. What speed, type, etc.

Thanks,
ACR
Honored Contributor
Rich S
Posts: 11,869
Registered: ‎07-03-2005
Message 2 of 3 (8,031 Views)

Re: Maximum Ram for HP d220 MT

For proper system operation, if the system supports DDR-SDRAM
DIMMs, the DIMMs must be industry-standard 184-pin, unbuffered
PC 2100 266 MHz-compliant CAS Latency 2 or 2.5 (CL = 2 or CL =
2.5), or PC 2700 333 MHz-compliant CAS Latency 2.5 (CL = 2.5)
2.5 volt DDR-SDRAM DIMMs. They must also contain the
mandatory Joint Electronic Device Engineering Council (JEDEC)
Serial Presence Detect (SPD) information. DIMMs constructed with
x4 SDRAM are not supported; the system will not start using
unsupported DIMMs.


per:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00711074/c00711074.pdf

Crucial states for 2700 RAM:

http://www.crucial.com/store/listparts.aspx?model=D220%20Series%20%28PC2700%29





PC homepage:

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesI...〈=en&cc=us


Rich



say thanks with HP POINTS
Honored Contributor
Rich S
Posts: 11,869
Registered: ‎07-03-2005
Message 3 of 3 (8,031 Views)

Re: Maximum Ram for HP d220 MT

Each memory slot can hold DDR PC2700,DDR PC3200 with a maximum of 1GB per slot.*



So 2 GB (1 GB each slot) of PC3200.


Rich
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.