01-26-2006 10:03 PM
What I have is a PCI vga card (Radeon 9250 / PCI, VGA, DVI, TV-out), which im trying to install in the PCI-riser-expantion-card.
Now this doesn't work, neither graphics card will post after installation (no led blicking).
Quess there is two options, disable integrated graphics (Intel) and used two monitors on Radeon-PCI or make the two co-exist.
In the system-bios (2.43) it is not possible to disable the integrated graphics, only to set VGA IRQ.
Any clues on how to proceed ?
01-28-2006 02:34 AM
See chapter 6 of this reference for upgrading the graphics in a d530:
A real quick read of this looks like what you are trying to do is possible.
Hope this helps.
01-29-2006 09:40 PM
- Enabling VGA Palette Snoop (seems that this must be on for multiple PCI-VGAs)
- Disable PCI SERERR
- Disable USB using same IRQ as VGA
- Disable serial, parallel, front usb ports (not used)
- Disable APIC
In the PCI-IRQ list i've tried diabling the VGA, but this has no effect, every reboot set it again.