changing dpi settings on hp4000 (66 Views)
Reply
Occasional Visitor
hp4000 print problems
Posts: 2
Registered: ‎07-06-2006
Message 1 of 3 (66 Views)
Accepted Solution

changing dpi settings on hp4000

When printing to the HP 4000 laser jet using MSword, the default settings (in the advanced tab) keeps defaulting to 1200dpi which makes the printer really slow. I change it to 600dpi, which fixes the problem, but next time MSword is started the setting has changed back to 1200 dpi.

any ideas on how to make the default stick at 600dpi would be greatly appreciated.
thanks
Frequent Advisor
eL_PuSHeR
Posts: 64
Registered: ‎08-12-2003
Message 2 of 3 (66 Views)

Re: changing dpi settings on hp4000

Change resolution to 600dpi in both Printers > Properties > Print Defaults and
Printers > Advanced > Print Defaults

Don't forget to click Apply after making changes.
Occasional Visitor
hp4000 print problems
Posts: 2
Registered: ‎07-06-2006
Message 3 of 3 (66 Views)

Re: changing dpi settings on hp4000

El Pusher,
thank you so much for that advice. the problem is solved. That has been bugging me for more than 2 years.
thank you soooo much.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.