Re: P2015 Firware issue (228 Views)
Reply
Occasional Contributor
Michael77_1
Posts: 5
Registered: ‎03-15-2006
Message 1 of 4 (228 Views)

P2015 Firware issue

[ Edited ]

I have a P2015DN with the Firmware 20061010. I was reading the thread;
http://h30499.www3.hp.com/t5/Black-and-White/HP-P2015-Firmware-Upgrade-Problem/m-p/4340501#M52826


The formatter number is JK362L4, so I can not update the firmware via the download method.

I am after the part number for the formatter dimm with the firmware 2XX80312, and where I can purchase this from in the UK.

I have previously installed these on printers covered under warranties, however this printer is now out of warranty.

It seems strange that DIMM is a fix for a major issue with the NIC, i.e. the issue I have with these printers is it loses the IP settings. So HP should replace this regardless.

Cheers

Mike

Honored Contributor
David Zuts
Posts: 3,878
Registered: ‎03-04-2007
Message 2 of 4 (228 Views)

Re: P2015 Firware issue

It may not be the firmware but the common issue of cold solder joints. Do a search for the baking method which fixes most problems with this board.
Occasional Contributor
Michael77_1
Posts: 5
Registered: ‎03-15-2006
Message 3 of 4 (228 Views)

Re: P2015 Firware issue

I'm just after the part number, for the DIMM Module to put the Firmware of 2XX80312. This has previously fixed issues with this printer model, as we have a small number here already.
Honored Contributor
Richard Eklund
Posts: 379
Registered: ‎09-30-2002
Message 4 of 4 (228 Views)

Re: P2015 Firware issue

Mike,

http://www2.printerworks.com/cgi-win/tpwall.exe/find?CB456-67901

Does this get you anywhere?

Richard
"Everytime you do a good deed, you kick the devil in the butt." Tim Allen
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.