01-16-2006 10:11 PM
'59.4 Printer Error, To continue turn off then on'
I've turned off and on many times but same problem occurs and printer will not print anything at all.
I've looked up the code and I see that it may be caused by the toner cartridge, or 'EP Motor Rotation Error'
This is what I've done so far:
Replaced Toner with HP branded
Checked shutter on toner moves properly
Checked fuser, visually seems OK.
Has anyone any experience with this fault and what are the procedures for repair ?
Thanks for your assistance.
01-16-2006 11:05 PM
you should be able to remove the motor to see if it rotates,then take it from there
01-18-2006 10:27 PM
One thing before you send for repair. Reseat the transfer roller. Maybe a longshot but back when these machines were first released in October 2003, I installed 300 for a local bank all over Ireland and ten or so of them had this error and reseating the transfer roller sorted them all.