LJ 4200 error 68 (256 Views)
Occasional Advisor
Posts: 17
Registered: ‎11-02-2001
Message 1 of 3 (256 Views)

LJ 4200 error 68

I worked on a LJ 4200TN. The customer had complained of the side margin being shifted about 3/16 of an inch to the left on this printer only. It didn't make a difference which PC printed to it or which tray was used. Resetting the NVRAM, and doing a cold reset didn't help. I ended up shifting the X-axis to +12 and it brought it back. The page was not skewed, the whole image (text) was shifted to the left. I'm guessing a formatter issue, since there were some error codes (68.1C1E, 68.1C3E, 68.3D02, 68.3D04) rather recent.
Looking for input.
Phil Rutledge
Regular Advisor
Posts: 96
Registered: ‎12-01-2004
Message 2 of 3 (256 Views)

Re: LJ 4200 error 68

do you have a disk attached...68.1 means problem with hard drive - reinitialize. if the error persists - change the hard disk
Esteemed Contributor
Posts: 611
Registered: ‎09-03-2004
Message 3 of 3 (256 Views)

Re: LJ 4200 error 68

Hi Phil,
Refer to the following document for more information on 68 error messages.


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.