Re: Disassembling an HP LaserJet 5Si (346 Views)
Reply
Occasional Visitor
HP LaserJet 5si Disasse
Posts: 2
Registered: ‎08-06-2010
Message 1 of 5 (346 Views)
Accepted Solution

Disassembling an HP LaserJet 5Si

How do I remove the top cover assembly and console of an HP LaserJet 5si? I have already removed the visable screws, but still cannot get it off. The online parts guide does not give enough information. Thank you.
Honored Contributor
Greg Gruchacz
Posts: 373
Registered: ‎07-02-2003
Message 2 of 5 (346 Views)

Re: Disassembling an HP LaserJet 5Si

There is a screw under the Control Panel that you need to remove to take the Top Cover off. You remove the Control Panel by pushing in on the front of the printer under the control panel and pushing up on the front edge of the control panel, there is a plastic tab that holds it in place. Other screws are on the left side under the access door and on the top back under the top cover door. I hope that this helps.

Greg
Esteemed Contributor
Stuart A. Woods
Posts: 1,370
Registered: ‎05-13-2002
Message 3 of 5 (346 Views)

Re: Disassembling an HP LaserJet 5Si

i think a service manual would help, i wouldnt work on any printer without it.
Occasional Visitor
HP LaserJet 5si Disasse
Posts: 2
Registered: ‎08-06-2010
Message 4 of 5 (346 Views)

Re: Disassembling an HP LaserJet 5Si

Got the console off. Thank you for the help. I am searching for a service manual, but am pressed for time. Again, thanks everyone.
Honored Contributor
David Zuts
Posts: 3,878
Registered: ‎03-04-2007
Message 5 of 5 (346 Views)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.