Best practice for Client server application testing (502 Views)
Reply
Frequent Advisor
Ravinder Allam
Posts: 81
Registered: ‎03-22-2010
Message 1 of 2 (502 Views)

Best practice for Client server application testing

Hi,

 

Can any one share 'Best practice for Client server application testing' , we need to do performance test for client server application written in VB 6.0.

 

Thanks

Ravi Allam

 

HP Expert
Suerte13cr
Posts: 736
Registered: ‎09-14-2011
Message 2 of 2 (469 Views)

Re: Best practice for Client server application testing

You would have to provide more detail as any protocol does testing recording the communication between the client and server and the resulting script is what will create load. You need to know the communication protocol used between your Client and Server for this and record a script.

 

Regards,

Mario.

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

LoadRunner:
http://h30499.www3.hp.com/t5/LoadRunner-Support-Customer/bd-p/loadrunner-support-customer-forum

Performance Center:
http://h30499.www3.hp.com/t5/Performance-Center-Support/bd-p/performance-center-support-customer

How to:
http://www.youtube.com/watch?v=4ChlysWupWM

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.