Re: modules/sub modules needed to integrate the following to OMi for receiving alarms (207 Views)
Reply
Frequent Advisor
qingc
Posts: 222
Registered: ‎05-24-2012
Message 1 of 4 (253 Views)
Accepted Solution

modules/sub modules needed to integrate the following to OMi for receiving alarms

Please advise which are modules/sub modules needed to integrate the following to OMi for receiving alarms on OMi

1.       SNMP traps to OMi
2.       MS SCOM alarms to OMi

 

HP Expert
Asaf Shechter
Posts: 1,352
Registered: ‎12-09-2008
Message 2 of 4 (246 Views)

Re: modules/sub modules needed to integrate the following to OMi for receiving alarms

You need BSM Connector in order to integrate 3rd party events into OMi.

You can download the SCOM connector from HP LN in order to integrate SCOM into OMi.

No additional modules are needed from BSM/OMi in order to receive 3rd party events.

Super Advisor
HanumantMadane
Posts: 323
Registered: ‎09-20-2011
Message 3 of 4 (209 Views)

Re: modules/sub modules needed to integrate the following to OMi for receiving alarms

Hi Asaf,

do we require only SCOM connector for interating SCOm with BSM/OMi or we require BSM connector as well. And where will we install SCOM connector on SCOM server or on BSM connector server.

Hanumant
HP Expert
Dmitry Shevchenko
Posts: 4,881
Registered: ‎01-30-2008
Message 4 of 4 (207 Views)

Re: modules/sub modules needed to integrate the following to OMi for receiving alarms

SCOM Connector is nothing but an add-on integration package for BSM Connector that provides OOB functionality for SCOM integration. SCOM Connector must be installed on the same server whre BSM Connector is installed. BSM Connector itself can be installed on either SCOM server or on any standalone server having connectivity to the SCOM server. 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.