SiteScope - port monitor (149 Views)
Reply
Occasional Advisor
ThePebble
Posts: 14
Registered: ‎06-15-2013
Message 1 of 2 (149 Views)

SiteScope - port monitor

I received a request to monitor EHLO reponses from various Exchange CAS servers.  My initial thought was to use a SiteScope port monitor, point it to the SMTP port, and use the "Send String" field to issue a "ehlo <domainname>.com" request.  However, I discovered that this wouldn't provide what the customer needed, as the monitor only has threshold conditions for status, round-trip time, and initial port response (i.e. there is no way to check against a response from whatever I issue via the "Send String" field).

 

So, I would appreciate any advice on how I might be able to meet this requirement.  Is there a way to tweak the port monitor to do what I need, or can you suggest a different SiS monitor type to use?

 

Thanks in advance!

Please use plain text.
HP Expert
Gunnar_L
Posts: 303
Registered: ‎05-22-2012
Message 2 of 2 (147 Views)

Re: SiteScope - port monitor

Hi,

 

If you are able to monitor those certs from cmd then you can create a cript and then run it from SiteScope.

 

Best Refgards,

Gunnar López
HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation