SiteScope 11.22 LDAP auth by user (not group) (263 Views)
Reply
Respected Contributor
Konstantin.Kornienko
Posts: 250
Registered: ‎12-25-2005
Message 1 of 4 (263 Views)

SiteScope 11.22 LDAP auth by user (not group)

Anybody had luck with authenticating single AD user in SiteScope  (not group).

 

Please then help then settings! Tried almost everything combinations of settings - groups auth is OK, user auth not working.

 

Regards

Please use plain text.
HP Expert
kenneth.gonzalez
Posts: 1,514
Registered: ‎04-28-2011
Message 2 of 4 (247 Views)

Re: SiteScope 11.22 LDAP auth by user (not group)

What do you mean by user/group authentication?
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Please use plain text.
Respected Contributor
Konstantin.Kornienko
Posts: 250
Registered: ‎12-25-2005
Message 3 of 4 (231 Views)

Re: SiteScope 11.22 LDAP auth by user (not group)

I mean making work this option (please look at attached pic)

 

 

Please use plain text.
HP Expert
kenneth.gonzalez
Posts: 1,514
Registered: ‎04-28-2011
Message 4 of 4 (218 Views)

Re: SiteScope 11.22 LDAP auth by user (not group)

You need to specify the user full Distinguished name in the Principal field. The one in the screenshot seems to be the group DN not user.
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation