Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license) (1850 Views)
Reply
Frequent Advisor
Omri_Ziv_1
Posts: 81
Registered: ‎01-27-2009
Message 1 of 7 (1,937 Views)
Accepted Solution

Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

Hi, I have BSM 9.12 with OMi and Sitescope 11.2 . I don't have SAM license so I try integrate sitescope and BSM thorugh OMi Events. I installed the opc agent on the sitescope 11.2 machine and I succefully connected it to the BSM "opc server". I tried to generate some messgaes from the Sitescope integration menu, but nothing seems to appear in the OMi console. Any suggestions? What should I do next ?

________________________________________________
Maximum performance with minimum resources over time.
Please use plain text.
Esteemed Contributor
krishnarajapantula
Posts: 747
Registered: ‎02-07-2009
Message 2 of 7 (1,934 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

Hi,

 

SAM license is not required for events integration between sitescope and OMi. But if SAM license is not there then you can not view any report under Applications->SAM.

 

But events integration if you have single server deployment you have to grant the certificate from the bsm server

 

If yoy have the distributed environment ( dps and GW different servers) then in platform settings you have to mention DPs server as certificate server and grant the certificate from DPS.

 

With Regards,

Krishna Rajapantula

Please use plain text.
HP Expert
Dmitry Shevchenko
Posts: 4,787
Registered: ‎01-30-2008
Message 3 of 7 (1,924 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

If you don't have SAM SiteScope won't be able to send topology to BSM. Do you have other means of creating CIs for SiteScope events to be resolved against them?

Please use plain text.
Visitor
Virendra03
Posts: 2
Registered: ‎05-05-2010
Message 4 of 7 (1,883 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

[ Edited ]

Hi,

 

I have BSM9.12 in distributed environment with no SAM license and I want to integrate the Sitescope11.12  with OMi-BSM9.12.

Can anybody have the exact procedure to do integration of same with help of OM agent.

Please use plain text.
Esteemed Contributor
Sergey  Popov
Posts: 295
Registered: ‎03-10-2010
Message 5 of 7 (1,866 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

In a nutshell:

- Install the Operations Agent via the SiteScope config tool

- Open the new OM integration window - "HP OA installation path" should be correctly resolved

- Enter your BSM server name

- Select "Enable sending events" and "Connect directly to BSM" checkbox

- Click on "Connect" button

- Go to your BSM machine, run "ovcm -l -listpending" from command line

- Run "ovcm -grant <Request_ID>" - id was shown in output from "Connect" button and from previous command too

- Click on "Install Policies" button in SiteScope

- Click on "Analyze" or "Send test event" or "Send test message" if you like

_______________
This thread is now 20% cooler
Please use plain text.
Visitor
Virendra03
Posts: 2
Registered: ‎05-05-2010
Message 6 of 7 (1,854 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)

Hi Sergey,

 

Thanks for reply, I have been installed the OV agent on sitescope server.

Now in sistescope's OM integration window should I give BSM DPS server name or BSM gateway server name?

 

Please use plain text.
HP Expert
Dmitry Shevchenko
Posts: 4,787
Registered: ‎01-30-2008
Message 7 of 7 (1,850 Views)

Re: Integrating BSM 9.12 with Sitescope 11.12 using OMi (No SAM license)


Virendra03 wrote:

Now in sistescope's OM integration window should I give BSM DPS server name or BSM gateway server name?


Gateway.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation