Re: HP Hardware monitoring in SiteScope 11.22? (236 Views)
Reply
Occasional Advisor
McNilsson
Posts: 10
Registered: ‎08-25-2013
Message 1 of 3 (280 Views)

HP Hardware monitoring in SiteScope 11.22?

How do you do hardware monitoring the best way in SiteScope? I have alot of HP servers (C7000 with BL460g8 blade servers) and would like to monitor different kind of statuses. I've tried the IPMI and iLO monitors, but these doesn't seem to work at all since the IPMI monitor still only supports version 1.5 (iLO 4 got 2.0) and the iLO monitor only support iLO2.

 

Would like to monitor hardware like fans, hard drives, etc.

 

How do other people do this?

Please use plain text.
Frequent Advisor
Ashish_Gupta
Posts: 94
Registered: ‎06-25-2013
Message 2 of 3 (244 Views)

Re: HP Hardware monitoring in SiteScope 11.22?

Hi,

As per my best of knowledge , HP SIM is the solution for the Hardware monitoring.

Regards,
Ashish
Please use plain text.
HP Expert
Battushi
Posts: 230
Registered: ‎05-23-2012
Message 3 of 3 (236 Views)

Re: HP Hardware monitoring in SiteScope 11.22?

Hello,

 

There is another option. You can try to use SNMP traps to get the data.

"HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution."
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation