Re: Cannot capture SNMP Trap from Infoblox in HP Openview (440 Views)
Reply
Super Advisor
Wang,MinJie
Posts: 281
Registered: ‎02-14-2006
Message 1 of 3 (469 Views)

Cannot capture SNMP Trap from Infoblox in HP Openview

Greeting,

 

I'm trying to capture some snmptraps sent from Infoblox. Below is my configuration in text format:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CONDITION
$e ".1.3.6.1.4.1.7779.3.1.1.1.1"
$G 6
$S 2
$2 "3"
SET
SEVERITY Major
MSGGRP "ESM-Only"
OBJECT "DNS:Infoblox"
CUSTOM "CaseNumber" "_"
TEXT "<$6>"

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Below is the Original message for that trap:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Generic: 6; Specific: 2; Enterprise: .1.3.6.1.4.1.7779.3.1.1.1.1;
Variables:

[1] .1.3.6.1.4.1.7779.3.1.1.1.2.1.0 (OctetString): 172.29.104.175
[2] .1.3.6.1.4.1.7779.3.1.1.1.2.2.0 (Integer): 3
[3] .1.3.6.1.4.1.7779.3.1.1.1.2.5.0 (OctetString): Login
[4] .1.3.6.1.4.1.7779.3.1.1.1.2.4.0 (Integer): 59
[5] .1.3.6.1.4.1.7779.3.1.1.1.2.11.0 (OctetString): A Serial Console login failure has occurred

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Unfortunately it's always displayed as "Unmatched". Please advise further.

 

Thank you!

Jay

Honored Contributor
David Campeau
Posts: 1,075
Registered: ‎04-12-2007
Message 2 of 3 (453 Views)

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

Is this for HPOM or SiteScope? I ask because this particular formum is more geared to SiteScope/BAC/BSM.

 

Thanks,

 

David

Super Advisor
Wang,MinJie
Posts: 281
Registered: ‎02-14-2006
Message 3 of 3 (440 Views)

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

HPOM. Thanks.

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.