BSMl OMi Server Connection setup fails connection test (370 Views)
Reply
Valued Contributor
TEX2020
Posts: 356
Registered: ‎02-02-2011
Message 1 of 7 (370 Views)

BSMl OMi Server Connection setup fails connection test

Hello,

 

I have setup a Connected Server under Operations Manangement Administration in BSM.

 

I am using HTTP and port 8081.

 

I am getting this error when I perform the connection test under Server Properties tab:

 

Ping failed due to the following error: Could not establish a valid SSL connection with the server 'server.xyz.com'. Please verify the SSL certificate configured for the Connected Server with this DNS name, or contact your administrator.

 

I also get this Error on the Outgoing Connection tab:

 

Ping failed due to the following error: The service residing on server 'server.xyx.com', could not be accessed at this time due to an error communicating with the server. Please try again later, or contact your administrator for additional details.

 

I tried to perform the Retrieve certifcate and Import certificate options and the certificates were imported, but still get these errors.

 

Any help appreciated.

 

Thanks.

 

 

Tex2020
Please use plain text.
Valued Contributor
TEX2020
Posts: 356
Registered: ‎02-02-2011
Message 2 of 7 (309 Views)

Re: BSMl OMi Server Connection setup fails connection test

Hello,

 

Any suggestions on this issue?

 

I have opened case with HP Support also.

 

Thanks.

Tex2020
Please use plain text.
HP Expert
PatWest
Posts: 831
Registered: ‎03-06-2008
Message 3 of 7 (302 Views)

Re: BSMl OMi Server Connection setup fails connection test

"I am using HTTP and port 8081"

 

You will need to use HTTPS -  you said yourself you have exchanged certificates between the servers ....

Please use plain text.
Occasional Advisor
VAA EMT Team
Posts: 9
Registered: ‎04-30-2009
Message 4 of 7 (263 Views)

Re: BSMl OMi Server Connection setup fails connection test

Hi,

Did you find any solution on this.

I am also getting the below error for Test Connection in Server Properties

Ping failed due to the following error: The service residing on server 'server.xyx.com', could not be accessed at this time due to an error communicating with the server. Please try again later, or contact your administrator for additional details


Test Connection in Outgoing Connection is finishing with success.

Please use plain text.
Valued Contributor
TEX2020
Posts: 356
Registered: ‎02-02-2011
Message 5 of 7 (258 Views)

Re: BSMl OMi Server Connection setup fails connection test

VAA EMT Team,

 

I am still working this with HP Support case #4648479525

 

Outgoing works for me as well....

 

Thanks.

Tex2020
Please use plain text.
Regular Advisor
SuperCoolNothin
Posts: 95
Registered: ‎02-04-2014
Message 6 of 7 (255 Views)

Re: BSMl OMi Server Connection setup fails connection test

[ Edited ]

Have you checked the certificate server (DPS) to see if there are any pending certs that need granting? If so, can you C+P the output here?

Please use plain text.
HP Expert
PatWest
Posts: 831
Registered: ‎03-06-2008
Message 7 of 7 (229 Views)

Re: BSMl OMi Server Connection setup fails connection test

For troubleshooting HTTPS issues, this document might be useful too :

 

 

HTTPS AGENT COMMUNICATION

 

TROUBLESHOOTING COOKBOOK

 

https://support.openview.hp.com/selfsolve/document/KM832402

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation