Re: BSM 9.23 SLM Hotfix (248 Views)
Reply
Esteemed Contributor
tibornad
Posts: 872
Registered: ‎06-03-2008
Message 1 of 6 (305 Views)
Accepted Solution

BSM 9.23 SLM Hotfix

hi all

 

there is a hotfix available for BSM 9.23 which is supposed to fix a bug in SLM. After reading the ReadMe file for this hotfix, i have to admit, i am even more confused than before. The explanation in the ReadMe does not make any sense at all and does cause more confusion than anything else.

 

- is it correct that this bug does impact SLAs created with any BSM version older than 9.23 (meaning 9.22 and downwards)?

 

thanks for the clarification

 

cheers

HP Expert
PatWest
Posts: 833
Registered: ‎03-06-2008
Message 2 of 6 (284 Views)

Re: BSM 9.23 SLM Hotfix

Assuming you are referring to the "9.23-SLM-StateSerialization" hotfix.

I've understood the README as follows:

After having installed this patch, all the SLAs created before the upgrade to BSM 9.23 will now run correctly.

These SLM's were not calculated correctly after BSM9.23 was installed.

All the SLA's that were created/cloned with BSM 9.23 will need to be :

1. recreated
or
2. cloned.

does it make sense now?

Let me know if there are still questions.

PatW
Esteemed Contributor
tibornad
Posts: 872
Registered: ‎06-03-2008
Message 3 of 6 (283 Views)

Re: BSM 9.23 SLM Hotfix

thanks for your reply Pat ...

 

i am relieved to hear that the instructions are not as clear as one would expect.

 

 

- After having installed this patch, all the SLAs created before the upgrade to BSM 9.23 will now run correctly

 

Agreed. Everything pre 9.23 will not run correctly

- These SLM's were not calculated correctly after BSM9.23 was installed.

 

Agreed as well.

- All the SLA's that were created/cloned with BSM 9.23 will need to be :

So beside the old (pre 9.23) one not working properly the ones created with 9.23 without hotfix will also be a problem?

 

 

 

In this case bottom line is: install the hotfix and everything will be fine, otherwise everything will be a mess. At least that's how i would sum it up :-)

HP Expert
PatWest
Posts: 833
Registered: ‎03-06-2008
Message 4 of 6 (271 Views)

Re: BSM 9.23 SLM Hotfix

So beside the old (pre 9.23) one not working properly the ones created with 9.23 without hotfix will also be a problem?

 

 >>> Confirmed.

 

In this case bottom line is: install the hotfix and everything will be fine, otherwise everything will be a mess. At least that's how i would sum it up :-)

 

>>> with regards to SLM specifically, i can't disagree here.

Frequent Advisor
Vadim Shif
Posts: 40
Registered: ‎01-19-2009
Message 5 of 6 (265 Views)

Re: BSM 9.23 SLM Hotfix

Hi

Some clearification on the note in readme:

If you have SLA that created already in 9.23 but BEFORE the fix instalation - this SLA will not work after the  fix instalation and should be removed, recreated or cloned to new one.

 

Thanks

Esteemed Contributor
tibornad
Posts: 872
Registered: ‎06-03-2008
Message 6 of 6 (248 Views)

Re: BSM 9.23 SLM Hotfix

Hello Vadim

 

This does make sense to me. Thank you very much for your reply.

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.