BSM 9.01 - BSM 9.12 - Upgrade_Wizard question (359 Views)
Reply
Super Advisor
Michele Ruggiero
Posts: 362
Registered: ‎04-11-2008
Message 1 of 7 (359 Views)
Accepted Solution

BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

Hi Expert,

I have to upgrade BSM 9.01 platform to 9.12. The platform is composed of 2 server, 1 GW and 1 DPS.

I have a doubt, the Upgrade_Wizard (upgrade_wizard_run_from90.bat) must be executed on DPS, on GW or in both server?

Thank you in advance

Michele

HP Expert
Asaf Shechter
Posts: 1,309
Registered: ‎12-09-2008
Message 2 of 7 (358 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

On both servers, start from DPS.
Super Advisor
Michele Ruggiero
Posts: 362
Registered: ‎04-11-2008
Message 3 of 7 (356 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

Thank you Asaf!

If I undestood well, the correct sequence is:

- Stop BSM 9.01 GW

- Stop BSM 9.01 DPS

- Uninstall BSM on both Servers.

- Install BSM 9.10 and 9.12 patch  on DPS

- Install BSM 9.10 and 9.12 patch  on GW

- Run Upgrade wizard on DPS and wait for the end

- Run Upgrade wizard on GW and wait for the end

- Start DPS

- Start GW

Is this sequence correct?

Thank you a lot

Michele

 

HP Expert
Asaf Shechter
Posts: 1,309
Registered: ‎12-09-2008
Message 4 of 7 (348 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

very correct

Super Advisor
Michele Ruggiero
Posts: 362
Registered: ‎04-11-2008
Message 5 of 7 (341 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

Hi Asaf, thank you.

Another question, in the Upgarde Guide there is the "Upload content packs" Phase:

######################

Wait for the BSM services to be started again and then upload the content packs again. Execute the following command on the Gateway server:

<HPBSM Install Directory>/opr/bin/ContentManager -username admin -password admin -a -forceReload

######################

 

this step is suggested or required?

Thanks

Michele

 

 

HP Expert
Asaf Shechter
Posts: 1,309
Registered: ‎12-09-2008
Message 6 of 7 (337 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

required. it will update all the default artifacts (such as KPIs, Indicators, assignments, etc).

Respected Contributor
Riya_Roy
Posts: 384
Registered: ‎12-23-2011
Message 7 of 7 (311 Views)

Re: BSM 9.01 - BSM 9.12 - Upgrade_Wizard question

Hi Michele,

Did you face any challenges during this up gradation ?

We are also planning to perform same up gradation from BSM 9.01 to BSM 9.12.
Is there any impact on below integration after up gradation to BSM 9.12
1) Sis (9.12) - BSM topology integration
2) Sis(9.12) – OMW (9.)- BSM event integration
3) OMW – BSM Topology Integration
4) OMW- BSM Event Integration
5) NNMi – BSM Event Integration
6)NNMi- BSM Topology Integration
8) BPM- BSM Event Integration
9)BPM-BSM Topology Integration
Also is their any impact after up gradation on below custom modules.
1) Custom SLAs
2) Custom views using RTSM
3) Custom Rules
4) Custom Reports
5) User Management
6) SSO configuration


Please suggest.
Riya Roy
Regards,
Riya Roy

Ship in harbor is safe -- but that is not what ships are built for …
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.