04-25-2013 03:17 AM - last edited on 04-27-2013 08:53 PM by Maiko-I
Not able to open the BPM console in the BPM machine or for that matter on any machine I tried. We had the latest JRE on the each machine.
Can you please through some light, what might be the reason?
P.S. This thread has been moved from Systems Management (OpenView-OP Mgmt) Support and News Forum to Application Perf Mgmt (BAC / BSM) Support and News Forum - HP Forums Moderator
04-25-2013 02:46 PM
Are you refering to the business process monitor software?
If so, i think you could get a more suitable reply if you post it in their product sub-forum. This subforum is for Operations Manager for Unix.
Let us know wihch product you are using.
TSIA Certified Support Professional (Chris Reed)
HP Software values your feedback regarding your overall Support experience. Contact us at firstname.lastname@example.org or my manager directly.
04-29-2013 03:41 AM - edited 04-29-2013 03:42 AM
Are you trying to connect to the console from within BSM or directly from the BPM machine itself?
If from BSM, could you try to RDP to the BPM machine, then try opening up http://localhost:2696? If that works, then it's most likely a FW issue between your BSM machine and your BPM machine (allow communications from your BSM machine to your BPM machine over TCP port 2696).
If you can't even reach the console from the BPM machine itself though, it might be something a bit trickier. Before we go down this route though, I think first try the above and see how it goes. Hopefully it is just a FW rule that needs sorting out.