Windows Storage Server (1193 Views)
Reply
Occasional Contributor
iranogajec
Posts: 4
Registered: ‎04-03-2008
Message 1 of 3 (1,193 Views)

Windows Storage Server

Hello all,

 

I have a question regarding updating a HP Windows Storage Server to Windows Server SP2.

 

The setup is DL380 G4 Storage Server with Windows Server 2003 Applicance Edition (Windows Server 2003 Enterprise SP1) installed on it. Software running on the server is HP Storage Services Release 5.5.

 

I would like to install the Service Pack 2 for Windows and I'd just like to know if it can be done straight away because someone else told me I need to up the Storage Release to 5.6 before SP2 is applied.

 

I have found this article that clears this situation and it only needs a SP2 installer kit installed and then I can proceed with the SP2 install.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=hr&prodTypeId=12...

 

So my question here is, does anyone have an experience with this and what is the right approach.

 

Thank you

 

Honored Contributor
Johan Guldmyr
Posts: 3,848
Registered: ‎06-14-2009
Message 2 of 3 (1,183 Views)

Re: Windows Storage Server

Hey, unsure about SP2 etc, but you may want to check out the service release:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1842478&...
Occasional Contributor
iranogajec
Posts: 4
Registered: ‎04-03-2008
Message 3 of 3 (1,178 Views)

Re: Windows Storage Server

Hi,

 

well that is a version of service release that requires SP2 already installed, so we come back to my original question can SP2 be installed on 5.5 directly.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.