02-14-2006 02:47 AM
is there any chance to start a telnet / ssl session on a print server applianc 4250 (J7941A). I've read about a dongle. Where can I get such a part.
Helpfull would be also a description of PSA file system. Starting backup, I've got an error message telling me "no space left on device", while the diagnostic report tells about 1 % disk usage. Clearing the event log doesn't help.
Thanks in advance
Solved! Go to Solution.
04-05-2006 07:59 PM
The problem you describe could be caused by a malfunction in firmware 2.5.137/139. Update to 2.5.143 asap. If disk space is already too little for that then you have to phone HP Support (because the next steps are too extensive to describe here).
04-05-2006 09:18 PM
thanks a lot. I now try to set up a new PSA with all printers from the old one. And than I will rename thie new PSA to the old and the old to a new name. So I can update the firmware, hoping not to loose configuration data (backup is'n possible at all). If it fails I will start again doing a factory reset before updating the appliance.
The better way to handle such a problem is to free up the disk space. I can't understand, why this is not possible if I do this on my own risk.