PCL driver problems on PSA 4200 (119 Views)
Regular Advisor
Posts: 91
Registered: ‎08-28-2001
Message 1 of 1 (119 Views)

PCL driver problems on PSA 4200


I have a PSA 4200 with a connected LaserJet 4000TN. My workstation is WinXP.

Printing via PostScript is OK, but for example printing 2 pages per sheet is impossible.

Printing via PCL5e for Text only is OK, but a Word document including pixel graphics will print black areas. After updating the driver (downloaded yesterday) leads to a white area instead of the graphics or at some graphics they are very small (1 * 1 cm instead of 15 * 15 cm).

If I connect this printer using a tcp-port with WinXP built-in driver the printout is correct. Connecting the printer to a PSA 4250 using the same driver as PSA 4200 (downloaded yesterday) everything is fine too.

What may be the reason for the PSA 4200 problem?

Thanks in advance,
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.