CL380 Driver Issue (173 Views)
Reply
Occasional Visitor
CA1105674
Posts: 1
Registered: ‎03-24-2004
Message 1 of 4 (173 Views)

CL380 Driver Issue

Hello,

I just setup my first node in my CL380 cluster. I installed windows 2000 Adv server first, then upgraded to 2K3 server. I have installed the Support pack for windows 2003. But I keep getting a message that the OS detects a device that it does not have a driver for. The device is listed as "Compaq CR3500 SCSI Array Device".

This device is listed twice in device manager. I cannot find any drivers on HP's website for this.

Any Ideas.

Thanks

-Keith
Please use plain text.
Advisor
Michael Saurman
Posts: 26
Registered: ‎01-28-2003
Message 2 of 4 (173 Views)

Re: CL380 Driver Issue

Please use plain text.
Advisor
Michael Saurman
Posts: 26
Registered: ‎01-28-2003
Message 3 of 4 (173 Views)

Re: CL380 Driver Issue

oops. I realized thats the firmware link,,, nevermind.

I'll post again if I find the solution
Please use plain text.
Occasional Visitor
BR755081
Posts: 3
Registered: ‎06-04-2003
Message 4 of 4 (173 Views)

Re: CL380 Driver Issue

Hi Keith,
I don't think there are any W2k or W2K3 drivers for the CR3500. You can get around this by selecting Other and then from the list in the left pane select Unknown and click on Unsupported Device in the right hand pane when the plug and play hardware detected wizard kicks in..
If two CR3500 controllers are installed then this will need to be done twice.
Hope this helps.
Cheers
Ian
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation